Applicable Engine:
2TR FE / 2TR EGR / 1TR-FE / 1TR-CNG
Applicable Brand:
TOYOTA
Applicable Car:
HILUX / INNOVA / HIACE / Land Cruiser Prado
Product parameters:
| Displacement | Fuel | Cylinder | Vale | Camshaft | Year |
| 2.7 |
Gasoline
|
4 | 16 | 2 | 2004- |
Complete Cylinder Head
Complete Cylinder Head Assembly for Toyota 2TR 2TR-FE 2TR-FE-EGR 2.7L Petrol Engine DOHC 16V
Introduction
Bare Cylinder Head Product NO.
| ML NO. | OEM NO. | REF NO. |
| MLG045A | 111010C040 111010C030 | |
| MLG045B | 1110175200 1110175240 | |
| MLG059A | 11101-75141 11101-0C010 | |
| MLG059B |
Product Description
This fully assembled cylinder head is designed for the Toyota 2TR-FE / 2TR-FE-EGR 2.7L inline-4 petrol engine, used in various Toyota Hilux, Hiace, Fortuner, Tacoma, and Land Cruiser Prado models. The assembly features a DOHC 16-valve configuration, with or without EGR system, and is built to OEM specifications for perfect fitment, combustion efficiency, and long-term durability.
Ideal for engine rebuilds, cylinder head cracks, or top-end overhauls, this product is ready-to-install and suitable for both EGR and non-EGR versions.
Technical Specifications
| Item | Specification |
|---|---|
| Engine Codes | 2TR, 2TR-FE, 2TR-FE-EGR |
| Displacement | 2.7L (2694cc) |
| Configuration | Inline-4 |
| Valvetrain | DOHC – 16 valves (4 valves/cylinder) |
| Fuel Type | Petrol (Gasoline) |
| Fuel System | EFI (Electronic Fuel Injection) |
| Cooling System | Water-cooled |
| Camshaft Drive | Timing chain |
| Emission Systems | EGR (for EGR version only) |
| Head Material | Aluminum alloy |
| Compression Ratio | ~9.6:1 (varies slightly by year) |
What’s Included (Fully Assembled)
- Cylinder head casting (aluminum alloy)
- Intake & exhaust valves
- Valve springs, retainers, and keepers
- Camshafts (DOHC)
- Rocker arms / roller followers
- Hydraulic lifters or lash adjusters
- Valve guides and seats (installed)
- Valve stem seals
- Camshaft caps (pre-installed)
All components are precision-assembled and pressure tested, ensuring durability and performance.
Required Accessories for Installation (Not Included)
| Component | Function | Recommendation |
|---|---|---|
| Cylinder Head Gasket | Sealing combustion chamber | Must Replace |
| Head Bolts | Stretch bolts (torque-to-yield) | Must Replace |
| Rocker Cover Gasket | Top oil seal | Replace |
| Intake / Exhaust Gaskets | Sealing manifolds | Replace |
| Timing Chain / Guides | Camshaft drive | Inspect or Replace |
| EGR Gaskets / Pipe Seal | For EGR versions | Replace |
| Thermostat Gasket | Cooling system integrity | Replace |
| Fresh Oil / Coolant | Post-installation | Must Replace |
Compatible Vehicles
This head fits Toyota 2.7L 2TR-FE petrol engines, including EGR-equipped versions, in:
Toyota Models
- Hilux Vigo / Revo (2004–Present)
- Hiace 2.7L Petrol (TRH200, TRH201, etc.)
- Land Cruiser Prado 120 / 150 (select markets)
- Fortuner 2.7L (2005–2020)
- Tacoma (North America)
- Innova (select markets)
EGR and Non-EGR heads differ slightly — confirm via OEM number or VIN.
Common OEM Part Numbers
- 11101-0C040
- 11101-0C030
- 11101-75200
- 11101-75240
Note: Above part numbers refer to head castings for different generations or EGR setups.
Common Engine Issues Addressed
| Issue | Cause | Head Replacement Benefit |
|---|---|---|
| Overheating & cracks | Coolant loss, blocked radiator | New pressure-tested casting |
| Valve leakage / misfire | Burned valves / worn seats | New valves + seals pre-installed |
| Oil leakage | Valve stem seals degraded | Replaced with new seals |
| Timing chain wear | Noise or cam timing error | Camshaft alignment pre-set |
| Compression loss | Warped or cracked head | CNC-machined deck surface |
Installation Notes
- Clean the block surface and check flatness before installing new head.
- Use OEM torque sequence and torque values in stages (cold torque + angle).
- Ensure correct alignment of camshafts and timing marks.
- Use high-quality gaskets and new bolts.
- Bleed cooling system fully to avoid air lock.
- Check for EGR fitment compatibility if engine includes emission control.
Export Markets & Applications
Used in both personal and commercial vehicles worldwide:
- Asia: Philippines, Thailand, Indonesia, Pakistan
- Middle East: UAE, Saudi Arabia, Iraq, Iran
- Africa: Kenya, Nigeria, Ghana, Egypt
- South America: Chile, Peru, Bolivia
- Oceania: Australia, New Zealand (Tacoma, Hiace)
Common customers:
Parts wholesalers
Engine rebuilders
Toyota service centers
Fleets (taxi, delivery, logistics)
4WD/off-road garages